Documentation

Lean.Meta.ExprDefEq

Return true if e is of the form fun (x_1 ... x_n) => ?m y_1 ... y_k), and ?m is unassigned. Remark: n, k may be 0. This function is used to filter unification problems in isDefEqArgs/isDefEqEtaStruct where we can assign proofs. If one side is of the form described above, then we can likely assign ?m. But it it's not, we would most likely apply proof irrelevance, which is usually very expensive since it needs to unify the types as well.

Instances For

    Support for Lean.reduceBool and Lean.reduceNat

    Equations
    • One or more equations did not get rendered due to their size.
    Instances For

      Support for reducing Nat basic operations.

      Equations
      • One or more equations did not get rendered due to their size.
      Instances For

        Support for constraints of the form ("..." =?= String.mk cs)

        Equations
        • One or more equations did not get rendered due to their size.
        Instances For

          Return true if e is of the form fun (x_1 ... x_n) => ?m x_1 ... x_n), and ?m is unassigned. Remark: n may be 0.

          Equations
          • One or more equations did not get rendered due to their size.
          Instances For

            Result type for isDefEqArgsFirstPass.

            • failed: Lean.Meta.DefEqArgsFirstPassResult

              Failed to establish that explicit arguments are def-eq. Remark: higher output parameters, and parameters that depend on them are postponed.

            • ok: Array NatArray NatLean.Meta.DefEqArgsFirstPassResult

              Succeeded. The array postponedImplicit contains the position of the implicit arguments for which def-eq has been postponed. postponedHO contains the higher order output parameters, and parameters that depend on them. They should be processed after the implicit ones. postponedHO is used to handle applications involving functions that contain higher order output parameters. Example:

              getElem :
                {cont : Type u_1} → {idx : Type u_2} → {elem : Type u_3} →
                {dom : cont → idx → Prop} → [self : GetElem cont idx elem dom] →
                (xs : cont) → (i : idx) → (h : dom xs i) → elem
              

              The arguments dom and h must be processed after all implicit arguments otherwise higher-order unification problems are generated. See issue #1299, when trying to solve

              getElem ?a ?i ?h =?= getElem a i (Fin.val_lt_of_le i ...)
              

              we have to solve the constraint

              ?dom a i.val =?= LT.lt i.val (Array.size a)
              

              by solving after the instance has been synthesized, we reduce this constraint to a simple check.

            Instances For
              @[specialize #[]]

              Check whether the types of the free variables at fvars are definitionally equal to the types at ds₂.

              Pre: fvars.size == ds₂.size

              This method also updates the set of local instances, and invokes the continuation k with the updated set.

              We can't use withNewLocalInstances because the isDeq fvarType d₂ may use local instances.

              Equations
              Instances For

                Each metavariable is declared in a particular local context. We use the notation C |- ?m : t to denote a metavariable ?m that was declared at the local context C with type t (see MetavarDecl). We also use ?m@C as a shorthand for C |- ?m : t where t is the type of ?m.

                The following method process the unification constraint

                   ?m@C a₁ ... aₙ =?= t
                

                We say the unification constraint is a pattern IFF

                1) `a₁ ... aₙ` are pairwise distinct free variables that are ​*not*​ let-variables.
                2) `a₁ ... aₙ` are not in `C`
                3) `t` only contains free variables in `C` and/or `{a₁, ..., aₙ}`
                4) For every metavariable `?m'@C'` occurring in `t`, `C'` is a subprefix of `C`
                5) `?m` does not occur in `t`
                ​*not*​ let-variables.
                2) `a₁ ... aₙ` are not in `C`
                3) `t` only contains free variables in `C` and/or `{a₁, ..., aₙ}`
                4) For every metavariable `?m'@C'` occurring in `t`, `C'` is a subprefix of `C`
                5) `?m` does not occur in `t`
                ​ let-variables.
                2) `a₁ ... aₙ` are not in `C`
                3) `t` only contains free variables in `C` and/or `{a₁, ..., aₙ}`
                4) For every metavariable `?m'@C'` occurring in `t`, `C'` is a subprefix of `C`
                5) `?m` does not occur in `t`
                

                Claim: we don't have to check free variable declarations. That is, if t contains a reference to x : A := v, we don't need to check v. Reason: The reference to x is a free variable, and it must be in C (by 1 and 3). If x is in C, then any metavariable occurring in v must have been defined in a strict subprefix of C. So, condition 4 and 5 are satisfied.

                If the conditions above have been satisfied, then the solution for the unification constrain is

                ?m := fun a₁ ... aₙ => t
                

                Now, we consider some workarounds/approximations.

                A1) Suppose t contains a reference to x : A := v and x is not in C (failed condition 3) (precise) solution: unfold x in t.

                A2) Suppose some aᵢ is in C (failed condition 2) (approximated) solution (when config.quasiPatternApprox is set to true) : ignore condition and also use

                    ?m := fun a₁ ... aₙ => t
                

                Here is an example where this approximation fails: Given C containing a : nat, consider the following two constraints ?m@C a =?= a ?m@C b =?= a

                If we use the approximation in the first constraint, we get ?m := fun x => x when we apply this solution to the second one we get a failure.

                IMPORTANT: When applying this approximation we need to make sure the abstracted term fun a₁ ... aₙ => t is type correct. The check can only be skipped in the pattern case described above. Consider the following example. Given the local context

                  (α : Type) (a : α)
                

                we try to solve

                 ?m α =?= @id α a
                

                If we use the approximation above we obtain:

                 ?m := (fun α' => @id α' a)
                

                which is a type incorrect term. a has type α but it is expected to have type α'.

                The problem occurs because the right hand side contains a free variable a that depends on the free variable α being abstracted. Note that this dependency cannot occur in patterns.

                We can address this by type checking the term after abstraction. This is not a significant performance bottleneck because this case doesn't happen very often in practice (262 times when compiling stdlib on Jan 2018). The second example is trickier, but it also occurs less frequently (8 times when compiling stdlib on Jan 2018, and all occurrences were at Init/Control when we define monads and auxiliary combinators for them). We considered three options for the addressing the issue on the second example:

                A3) a₁ ... aₙ are not pairwise distinct (failed condition 1). In Lean3, we would try to approximate this case using an approach similar to A2. However, this approximation complicates the code, and is never used in the Lean3 stdlib and mathlib.

                A4) t contains a metavariable ?m'@C' where C' is not a subprefix of C. If ?m' is assigned, we substitute. If not, we create an auxiliary metavariable with a smaller scope. Actually, we let elimMVarDeps at MetavarContext.lean to perform this step.

                A5) If some aᵢ is not a free variable, then we use first-order unification (if config.foApprox is set to true)

                   ?m a_1 ... a_i a_{i+1} ... a_{i+k} =?= f b_1 ... b_k
                

                reduces to

                   ?M a_1 ... a_i =?= f
                   a_{i+1}        =?= b_1
                   ...
                   a_{i+k}        =?= b_k
                

                A6) If (m =?= v) is of the form

                    ?m a_1 ... a_n =?= ?m b_1 ... b_k
                
                 then we use first-order unification (if `config.foApprox` is set to true)
                

                A7) When foApprox, we may use another approximation (constApprox) for solving constraints of the form ?m s₁ ... sₙ =?= t ``` where s₁ ... sₙ are arbitrary terms. We solve them by assigning the constant function to ?m. ?m := fun _ ... _ => t

                 In general, this approximation may produce bad solutions, and may prevent coercions from being tried.
                 For example, consider the term `pure (x > 0)` with inferred type `?m Prop` and expected type `IO Bool`.
                 In this situation, the
                 elaborator generates the unification constraint
                 ```
                 ?m Prop =?= IO Bool
                 ```
                 It is not a higher-order pattern, nor first-order approximation is applicable. However, constant approximation
                 produces the bogus solution `?m := fun _ => IO Bool`, and prevents the system from using the coercion from
                 the decidable proposition `x > 0` to `Bool`.
                
                 On the other hand, the constant approximation is desirable for elaborating the term
                 ```
                 let f (x : _) := pure "hello"; f ()
                 ```
                 with expected type `IO String`.
                 In this example, the following unification constraint is generated.
                 ```
                 ?m () String =?= IO String
                 ```
                 It is not a higher-order pattern, first-order approximation reduces it to
                 ```
                 ?m () =?= IO
                 ```
                 which fails to be solved. However, constant approximation solves it by assigning
                 ```
                 ?m := fun _ => IO
                 ```
                 Note that `f`s type is `(x : ?α) -> ?m x String`. The metavariable `?m` may depend on `x`.
                 If `constApprox` is set to true, we use constant approximation. Otherwise, we use a heuristic to decide
                 whether we should apply it or not. The heuristic is based on observing where the constraints above come from.
                 In the first example, the constraint `?m Prop =?= IO Bool` come from polymorphic method where `?m` is expected to
                 be a **function** of type `Type -> Type`. In the second example, the first argument of `?m` is used to model
                 a **potential** dependency on `x`. By using constant approximation here, we are just saying the type of `f`
                 does **not** depend on `x`. We claim this is a reasonable approximation in practice. Moreover, it is expected
                 by any functional programmer used to non-dependently type languages (e.g., Haskell).
                 We distinguish the two cases above by using the field `numScopeArgs` at `MetavarDecl`. This field tracks
                 how many metavariable arguments are representing dependencies.
                
                def Lean.Meta.mkAuxMVar (lctx : Lean.LocalContext) (localInsts : Lean.LocalInstances) (type : Lean.Expr) (numScopeArgs : optParam Nat 0) :
                Equations
                Instances For
                  Instances For
                    @[inline]
                    Equations
                    • One or more equations did not get rendered due to their size.
                    Instances For

                      Auxiliary function used to "fix" subterms of the form ?m x_1 ... x_n where x_is are free variables, and one of them is out-of-scope. See Expr.app case at check. If ctxApprox is true, then we solve this case by creating a fresh metavariable ?n with the correct scope, an assigning ?m := fun _ ... _ => ?n

                      def Lean.Meta.CheckAssignmentQuick.check (hasCtxLocals : Bool) (mctx : Lean.MetavarContext) (lctx : Lean.LocalContext) (mvarDecl : Lean.MetavarDecl) (mvarId : Lean.MVarId) (fvars : Array Lean.Expr) (e : Lean.Expr) :
                      Equations
                      Instances For
                        partial def Lean.Meta.CheckAssignmentQuick.check.visit (hasCtxLocals : Bool) (mctx : Lean.MetavarContext) (lctx : Lean.LocalContext) (mvarDecl : Lean.MetavarDecl) (mvarId : Lean.MVarId) (fvars : Array Lean.Expr) (e : Lean.Expr) :

                        Auxiliary function for handling constraints of the form ?m a₁ ... aₙ =?= v. It will check whether we can perform the assignment

                        ?m := fun fvars => v
                        

                        The result is none if the assignment can't be performed. The result is some newV where newV is a possibly updated v. This method may need to unfold let-declarations.

                        Equations
                        • One or more equations did not get rendered due to their size.
                        Instances For
                          @[export lean_checked_assign]
                          Equations
                          • One or more equations did not get rendered due to their size.
                          Instances For
                            @[inline]
                            Equations
                            Instances For

                              Structure for storing defeq cache key information.

                              Instances For
                                Equations
                                • One or more equations did not get rendered due to their size.
                                Instances For
                                  @[export lean_is_expr_def_eq]